Click Here

NOTE: This currently does NOT work in any windows applications other than the test application. Please be patient as this is still under development.

Download the PS3EyeDriver.zip
Download the PS3EyeTest.zip
Download the PS3EyeDSCam.zip

Driver Installation:

- First run the Install.bat in Driver directory. You might need to reboot your machine after this step.
- Plug in the PS3Eye camera. Let the Windows detect the hub and two USB Camera-B3.04.06.1 devices.
- One of these is the audio and the other one is the camera itself. After a few seconds Windows will automatically detect and install one of the USB Camera-B3.04.06.1 devices. This will be the audio device. The one that is left is the camera.
- Windows will prompt you for a driver. Cancel out of that and go to the Device Manager, right click on USB Camera-B3.04.06.1 device and chose Update Driver Software.
- From there select Browse my computer for driver software and select the Driver directory. The PS3Eye Camera driver will be installed.

DirectShow Video Source Installation:

- Download and extract all the files from the PS3EyeDSCam.rar archive. 
- Run Register.bat file. This will register the PS3Eye.ax DirectShow filter. 
- Plug in the camera (if not already plugged in). 
- To test run AMCAP.EXE application (also included in the PS3EyeDSCam.rar archive).

 

Source: http://nuigroup.com/forums/viewthread/2921/

 

.Click Here

Click Here

*UPDATE* - Dazzle

Tools Needed:
Playstation 3
Dazzle Capture Card
3 Audio/Video splitters [Make sure they have 2 female and 1 male inputs]
1 set of Audio/ Video cables [Red White and Yellow]

Step 1: Take 1 splitter, plug the male side of the splitter into the yellow input  on the dazzle.
Step 2: Take the next splitter and  plug the male side of the splitter into the red input on the dazzle.
Step 3:Take the last  splitter and plug the male side of the splitter into the white input on the dazzle.
Step 4: Take your A/V cables that came with your PS3 and plug the White,Yellow and Red into the respected colors on the AV splitters.
Now so far your Setup should be like this

PS3-------Yellow,Red,White A/V cable------3 A/V splitters----Dazzle
Now dont worry if one of the inputs on the A/V spliters is empty we will get to that.
Step 5:Now grab that A/V cable that has two outputs on both sides and put them into thier respected inputs on the Splitter.
Step 6: Now take the other end of the A/V cable and put it in the respected inputs on the back of your T.V
Step 7: Now Turn on your PS3 If you dont see the Xmb on your T.V you have done something Wrong and Try to Repeat your steps.
Step 8: Install the drivers that came with the Dazzle [It works on Vista and XP]
Step 9: Once installed Connect the USB cord on the the dazzle to your Computer.
Step 10: Now Go to your Favorite Video Editior. [I personally use Windows Movie maker]
Step 11: Go to Capture Source and select Dazzle DVC 100
Step 12: Ok Now the XMB should be on the little preview Screen.
Step 13: Press record and Happy Recording your gameplay.

As Per: xXClock-WorkXx

 

What is Wubi?
Wubi (Windows-based Ubuntu Installer) is an official Windows-based free software installer for Ubuntu, licensed under the GPL. Basically you can install Linux as a second Operating System on a second partition. When your computer boots up, it asks you what OS you would like to run.


Click Here